The laptop runs on different operating systems like Windows, Mac etc nonstop but some people complains that they are facing concern as LED on after shutting down and the solutions for this has been provided by the professionals. Entire concerns are solved here under the professional’s supervision that are certified and handled a lot of issues till now.
The Windows laptops are very easy to use without any interruption if it has been downloaded, installed and configured in the recommended manner which is very important for the users. The common issues which can be faced and it can be easily settled are like installation, update & upgrade, Configuration issue, Setup problem, Slow running and performance etc. The other concern that can create problem is that the laptop still on after shutting down, but no need to take tension because the online tech support has been offered here for US and Canada regions Windows users on priority at just a single click.
The customer can also check the methods which have been mentioned below. These steps can also help in fixing such issues. So, the users can try the instruction once and if the problem occurs then feel free to get in touch with the technicians available at Windows Tech Support.
Few methods to fix the laptop issues that the LED light still on after shut down:
Turn off the fast startup temporary:
The initial point is to press Windows + X from keyboard and select the Power Options.
If not users can also visit to Control Panel then System and Security tab and select the power Options.
After this, uses are needed to click on choose what power buttons do.
After this, select the change settings that are currently unavailable.
Now, uncheck Turn on fast startup (Recommended) box and save the settings and restart your computer.
At last, check if issue fixes windows won’t shut down properly problem.
If the above steps not able to settle the issue then perform the following action:
Pull laptop battery out and try to run on AC Mode:
The users may try to remove the laptop battery and then run it on AC mode only. Then shut down and see the LED light turn off correctly or not. If yes, then insert the battery and run it properly.
Steps to solve the above error:
The first step is to make a right click over the Computer tab and open the “Device Manager” option
From this tab click the + sign available before "Network adapters"
Now, need to open the "Wireless adapter n1030" under Network adaptors option
After this, go to the Properties option and click the Power Management tab and uncheck box as "Allow the computer to turn off this device to save power".
Then again visit to "Network adapters" and click"RTL8111E Fast Ethernet controller" option, click over the Properties option and go to the Power Management tab then need to uncheck the box as "Allow the computer to turn off this device to save power".
Visit to “Control Panel” tab
From there go to "Hardware and Sound" and move to "Power Options" and "Choose what the power buttons do"
Click on the option which says "Shut down"
At last, the users are needed to hit the "Choose what closing the lid does" and select "Shut down"
For best online support the customers are required to dial the Windows customer service phone number which is available 24x7 in support for the laptop not shutting down issue. The errors are fixed at just a single click without any affect to the computer parts and whole problems are settled in the correct manner at a very low fare of service charge.